Become a Site Supporter and Never see Ads again!

Author Topic: Clamps for Studio Projects C4?  (Read 5213 times)

0 Members and 1 Guest are viewing this topic.

Offline macroint

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4378
  • Gender: Male
    • Jeff's List
Clamps for Studio Projects C4?
« on: September 28, 2004, 03:25:22 PM »
Any recommendations for clamps for SP-C4?
Thanks,

Jeff
Peluso CEMC6>PS-2>AD-20>NJB3


SUPPORT LOCAL MUSIC
http://baltimore-taper.blogspot.com

Offline thegreatgumbino

  • Team Texas
  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 3347
  • Gender: Male
  • Retired Taper
Re: Clamps for Studio Projects C4?
« Reply #1 on: September 28, 2004, 03:39:02 PM »
Are you looking for clamps or shockmounts?  The mics should have come with shockmounts.  If you want to upgrade, the AT8410 are pretty much standard.  For a true clamp, the bogen super clamp is the way to go.  Do a search for more info on both.
It’s not what you look like when you’re doin’ what you’re doin’, it’s what your doin’ when you’re doin’ what you look like your doin’…express yourself. - Charles Wright

My recordings on the Archive

Offline macroint

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4378
  • Gender: Male
    • Jeff's List
Re: Clamps for Studio Projects C4?
« Reply #2 on: September 28, 2004, 04:04:53 PM »
>Are you looking for clamps or shockmounts? 
>The mics should have come with shockmounts. 
>For a true clamp, the bogen super clamp is the way to go.

   Thanks...I'm fresh meat, so I apologize if I'm not getting the terminology down. I want to clamp the SP-C4's to a railing and the Bogen Super Clamp looks like overkill. I just don't want to buy some clamps and then find out they won't accomodate the mics.

   
Jeff
Peluso CEMC6>PS-2>AD-20>NJB3


SUPPORT LOCAL MUSIC
http://baltimore-taper.blogspot.com

Offline fozzy

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3803
  • Gender: Male
  • move along, nothing much to see here
FT: AT853 hyper caps, I need white, have black pair

Rig:
MK 4V > KCY 250/5 Ig (KS 10I)  > VST62IUg > V2 > 722

Playback 1: Audiophile 2496 > coax > Benchmark DAC1 > AKG 701
Playback 2: Audiophile 2496 > coax > Benchmark DAC1 > Audioquest Diamondback XLR > PS Audio HCA2 > Kimber 4pr >B&W 600S3
Playback office: Generic Pci coax > Lucid DAC9624 > AKG K240

Offline Nick Graham

  • Amorican
  • Trade Count: (3)
  • Needs to get out more...
  • Posts: 4076
  • Gender: Male
Re: Clamps for Studio Projects C4?
« Reply #4 on: September 28, 2004, 08:56:51 PM »
not quite as super

http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=298908&is=REG



This is the clamp I have, and it's perfect for pretty much any situation. Highly recommended...
Right now nothing...in the past: Schoeps CMC6, AKG 480, AKG 460, AKG 414, MBHO 603a, Neumann KM100, ADK TL>Schoeps MK4, Schoeps MK2, Schoeps MK41, AKG ck61, AKG ck62, AKG ck63, Neumann AK40, Neumann AK50, MBHO ka200>Lunatec V2, Lunatec V3, Apogee Mini-Me, Oade M148, Oade M248, Sound Devices MP2, Sonosax SXM2>Sony (mod)SBM1, Apogee AD500>D7, D8, D100, M1, R1, R4, R09, iRiver HP120, Microtrack

Offline Sanjay

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 5708
  • Gender: Male
  • www.drivebytruckers.com/tourdiary.html
Re: Clamps for Studio Projects C4?
« Reply #5 on: September 29, 2004, 12:25:38 AM »
i've even used a small rowi clamp and it has worked fine. 
mics & cameras

Offline Chuck

  • Trade Count: (41)
  • Needs to get out more...
  • *****
  • Posts: 10459
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Clamps for Studio Projects C4?
« Reply #6 on: September 30, 2004, 01:57:06 PM »
not quite as super

http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=298908&is=REG



This is the clamp I have, and it's perfect for pretty much any situation. Highly recommended...

I use this clamp as well.
Nutter sold it to me.
Reality is merely an illusion, albeit a very persistent one.

Microphones: (2) Microtech Gefell M300, (2) AKG C 480 B comb-ULS/ CK 61/ CK 63, (2) CAD GXL1200 (cardioid and sub-cardioid capsule & electronics mod), (2) Audix M1290-o, (2) Micro capsule active cables w/ Naiant PFA's, (2) Naiant MSH-1O, (2) Naiant AKG Active cables, (2) Church CA-11 (cardioid), (2) CAD C9, (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Tascam DR-680, iRiver iHP-120 (Rockboxed & RTC mod), Denon DTR-80p

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Online F.O.Bean

  • Is a 4 channel slut and
  • Trade Count: (123)
  • Needs to get out more...
  • *****
  • Posts: 40608
  • Gender: Male
  • Taperus Maximus
Re: Clamps for Studio Projects C4?
« Reply #7 on: September 30, 2004, 03:00:25 PM »
not quite as super

http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=298908&is=REG



This is the clamp I have, and it's perfect for pretty much any situation. Highly recommended...

I use this clamp as well.
Nutter sold it to me.

i have this one and the small rowi one,a nd i have been using this one more and more :)

on a side note: if the cheap plastic thing comes off the end you actually screw onto the stan/railing/whatever, try taking a bicycle cap and screwing it on their, i GUARANTEE that bitch wont come off again, its worked like a charm since i put the bike cap on too :)

give it a try ;D
Recording:
Schoeps MK4's | MK41's -> Schoeps | NBob 250/05 KCY's -> Schoeps VMS 02IB | Naiant +60v/Low Noise PFA's -> DarkTrain Right Angle Stubby | GakCable XLR's -> Sound Devices MixPre-6 | Tascam DR-70D -> 128gb | 64gb SanDisk Extreme Pro SDXC-I

Playback:
Home: HP Pavilion PC -> FiiO E10K DAC/HP Amp -> Sony SA-VA15 Speakers | MDR-7506 Cans
Portable: Sony NW-A35 Walkman -> FiiO E11K HP Amp -> Optoma NuForce Primo 8 | EDC IEM's > Comply Isolation+ Tips

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline Chuck

  • Trade Count: (41)
  • Needs to get out more...
  • *****
  • Posts: 10459
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Clamps for Studio Projects C4?
« Reply #8 on: September 30, 2004, 03:14:08 PM »
not quite as super

http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=298908&is=REG



This is the clamp I have, and it's perfect for pretty much any situation. Highly recommended...

I use this clamp as well.
Nutter sold it to me.

i have this one and the small rowi one,a nd i have been using this one more and more :)

on a side note: if the cheap plastic thing comes off the end you actually screw onto the stan/railing/whatever, try taking a bicycle cap and screwing it on their, i GUARANTEE that bitch wont come off again, its worked like a charm since i put the bike cap on too :)

give it a try ;D

My plastic thingy broke off the first time i used it. I've been using it without a cap. I might try the bicycle tire cap thing though.
Reality is merely an illusion, albeit a very persistent one.

Microphones: (2) Microtech Gefell M300, (2) AKG C 480 B comb-ULS/ CK 61/ CK 63, (2) CAD GXL1200 (cardioid and sub-cardioid capsule & electronics mod), (2) Audix M1290-o, (2) Micro capsule active cables w/ Naiant PFA's, (2) Naiant MSH-1O, (2) Naiant AKG Active cables, (2) Church CA-11 (cardioid), (2) CAD C9, (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Tascam DR-680, iRiver iHP-120 (Rockboxed & RTC mod), Denon DTR-80p

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

jpschust

  • Guest
  • Trade Count: (0)
Re: Clamps for Studio Projects C4?
« Reply #9 on: September 30, 2004, 04:06:08 PM »
what size bike cap (there are 2 different sizes)

Online F.O.Bean

  • Is a 4 channel slut and
  • Trade Count: (123)
  • Needs to get out more...
  • *****
  • Posts: 40608
  • Gender: Male
  • Taperus Maximus
Re: Clamps for Studio Projects C4?
« Reply #10 on: September 30, 2004, 04:16:45 PM »
what size bike cap (there are 2 different sizes)


umm, i dunno, what i had in my garage, the most basic ones jonny, just try what ya have, it will flatten nicely, im gonna say the smaller ones ???

and damn, i bet your stands and other peoples stands are FUCK ED not using a cap, that shit digs right into a stand :P
Recording:
Schoeps MK4's | MK41's -> Schoeps | NBob 250/05 KCY's -> Schoeps VMS 02IB | Naiant +60v/Low Noise PFA's -> DarkTrain Right Angle Stubby | GakCable XLR's -> Sound Devices MixPre-6 | Tascam DR-70D -> 128gb | 64gb SanDisk Extreme Pro SDXC-I

Playback:
Home: HP Pavilion PC -> FiiO E10K DAC/HP Amp -> Sony SA-VA15 Speakers | MDR-7506 Cans
Portable: Sony NW-A35 Walkman -> FiiO E11K HP Amp -> Optoma NuForce Primo 8 | EDC IEM's > Comply Isolation+ Tips

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline Chuck

  • Trade Count: (41)
  • Needs to get out more...
  • *****
  • Posts: 10459
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Clamps for Studio Projects C4?
« Reply #11 on: September 30, 2004, 05:41:54 PM »
what size bike cap (there are 2 different sizes)


umm, i dunno, what i had in my garage, the most basic ones jonny, just try what ya have, it will flatten nicely, im gonna say the smaller ones ???

and damn, i bet your stands and other peoples stands are FUCK ED not using a cap, that shit digs right into a stand :P

Yeah, it does dig in pretty good without that plastic cap on there.
Reality is merely an illusion, albeit a very persistent one.

Microphones: (2) Microtech Gefell M300, (2) AKG C 480 B comb-ULS/ CK 61/ CK 63, (2) CAD GXL1200 (cardioid and sub-cardioid capsule & electronics mod), (2) Audix M1290-o, (2) Micro capsule active cables w/ Naiant PFA's, (2) Naiant MSH-1O, (2) Naiant AKG Active cables, (2) Church CA-11 (cardioid), (2) CAD C9, (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Tascam DR-680, iRiver iHP-120 (Rockboxed & RTC mod), Denon DTR-80p

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline dnsacks

  • Trade Count: (9)
  • Taperssection All-Star
  • ****
  • Posts: 1643
Re: Clamps for Studio Projects C4?
« Reply #12 on: September 30, 2004, 05:45:49 PM »
plastic cap -- the "big one" would be the same size as a car tire's valve cap (a schrader valve), while the small one would be a lot smaller (closer in size to a male 1/8" stereo jack) and would cover a valve with a fitting you'd need to unscrew before filling up the bike tire (a presta valve)

That help?  I'm betting it'd be the "big" one

Online F.O.Bean

  • Is a 4 channel slut and
  • Trade Count: (123)
  • Needs to get out more...
  • *****
  • Posts: 40608
  • Gender: Male
  • Taperus Maximus
Re: Clamps for Studio Projects C4?
« Reply #13 on: September 30, 2004, 05:58:03 PM »
i wish i knew, i can measure, lemme see :)

the cap is: a wee bit less than 3/8 in diameter ;)
Recording:
Schoeps MK4's | MK41's -> Schoeps | NBob 250/05 KCY's -> Schoeps VMS 02IB | Naiant +60v/Low Noise PFA's -> DarkTrain Right Angle Stubby | GakCable XLR's -> Sound Devices MixPre-6 | Tascam DR-70D -> 128gb | 64gb SanDisk Extreme Pro SDXC-I

Playback:
Home: HP Pavilion PC -> FiiO E10K DAC/HP Amp -> Sony SA-VA15 Speakers | MDR-7506 Cans
Portable: Sony NW-A35 Walkman -> FiiO E11K HP Amp -> Optoma NuForce Primo 8 | EDC IEM's > Comply Isolation+ Tips

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Online F.O.Bean

  • Is a 4 channel slut and
  • Trade Count: (123)
  • Needs to get out more...
  • *****
  • Posts: 40608
  • Gender: Male
  • Taperus Maximus
Re: Clamps for Studio Projects C4?
« Reply #14 on: October 01, 2004, 05:13:06 PM »
anybody try that bike cap thing ???
Recording:
Schoeps MK4's | MK41's -> Schoeps | NBob 250/05 KCY's -> Schoeps VMS 02IB | Naiant +60v/Low Noise PFA's -> DarkTrain Right Angle Stubby | GakCable XLR's -> Sound Devices MixPre-6 | Tascam DR-70D -> 128gb | 64gb SanDisk Extreme Pro SDXC-I

Playback:
Home: HP Pavilion PC -> FiiO E10K DAC/HP Amp -> Sony SA-VA15 Speakers | MDR-7506 Cans
Portable: Sony NW-A35 Walkman -> FiiO E11K HP Amp -> Optoma NuForce Primo 8 | EDC IEM's > Comply Isolation+ Tips

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

 

RSS | Mobile
Page created in 0.304 seconds with 42 queries.
© 2002-2018 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company